Following second hand Lamella Separators are for sale at the moment (subject to prior sale):
1 piece lamella separator type 6 / 40 / 0,2
1 piece lamella separator type 9 / 40 / 0,3
1 piece lamella separator type 19 / 40 / 1
1 piece lamella separator type 50 / 40 / 2,5 / K
1 piece lamella separator type 100 / 40 / 4,5 / K
further sizes on request (E-Mail: leiblein@leiblein.de) !
back to 'second hand machinery'
1 piece lamella separator type 6 / 40 / 0,2
technical specification:
| clarifying surface | : 6 m² |
| lamella distance | : 40 mm |
| declination angle | : 60° |
| content about | : 1,5 m³ |
| sludge content about | : 0,2 m³ |
| dimensions l x w x h about | : 1.650 x 1.200 x 3.600 mm |
| length of lamellas | : 1.000 mm |
| material of separator | : carbon steel |
| material of lamellas | : PP |
| empty weight about | : 250 kg |
design:
at a flow rate of e.g. 3 m³/h and a clarifying surface of 6 m² follows a clarifying surface of 0,5 m/h.
surface coating of the casing
| inside: | sandblasted (SA 2.5) |
| primary coating and 3 layers | |
| epoxide coating (about 400 µm) |
| outside: | sandblasted (SA 2.5), primary coating |
| coating and paint in RAL 5009 |
price on application
1 piece lamella separator type 9 / 40 / 0,3
technical specification:
| clarifying surface | : 9 m² |
| lamella distance | : 40 mm |
| declination angle | : 60° |
| content about | : 2 m³ |
| sludge content about | : 0,3 m³ |
| dimensions l x w x h about | : 2.000 x 1.200 x 3.200 mm |
| length of lamellas | : 1.500 mm |
| material of separator | : carbon steel |
| material of lamellas | : PP |
| empty weight about | : 790 kg |
design:
at a flow rate of e.g. 4 m³/h and a clarifying surface of 9 m² follows a clarifying surface of ca. 0,4 m/h.
surface coating of the casing
| inside: | sandblasted (SA 2.5) |
| primary coating and 3 layers | |
| epoxide coating (about 400 µm) |
| outside: | sandblasted (SA 2.5), primary coating |
| coating and paint in RAL 5009 |
price on application
1 piece lamella separator type 19 / 40 / 1
technical specification:
| clarifying surface | : 19 m² |
| lamella distance | : 40 mm |
| declination angle | : 60° |
| content about | : 5 m³ |
| sludge content about | : 1 m³ |
| dimensions l x w x h about | : 2.800 x 1.200 x 4.000 mm |
| length of lamellas | : 1.500 mm |
| material of separator | : carbon steel |
| material of lamellas | : PP |
| empty weight about | : 1.200 kg |
design:
at a flow rate of e.g. 10 m³/h and a clarifying surface of 19 m² follows a clarifying surface of ca. 0,5 m/h.
surface coating of the casing
| inside: | sandblasted (SA 2.5) |
| primary coating and 3 layers | |
| epoxide coating (about 400 µm) |
| outside: | sandblasted (SA 2.5), primary coating |
| coating and paint in RAL 5009 |
price on application
1 piece lamella separator type 50 / 40 / 2,5 / K
technical specification:
| clarifying surface | : 50 m² |
| lamella distance | : 40 mm |
| declination angle | : 60° |
| content about | : 13 m³ |
| sludge content about | : 2,5 m³ |
| dimensions l x w x h about | : 3.500 x 2.450 x 4.600 mm |
| length of lamellas | : 1.500 mm |
| material of separator | : carbon steel |
| material of lamellas | : PP |
| empty weight about | : 3.000 kg |
design:
at a flow rate of e.g. 25 m³/h and a clarifying surface of 50 m² follows a clarifying surface of 0,5 m/h.
surface coating of the casing
| inside: | sandblasted (SA 2.5) |
| primary coating and 3 layers | |
| epoxide coating (about 400 µm) |
| outside: | sandblasted (SA 2.5), primary coating |
| coating and paint in RAL 5009 |
price on application
option:
1 piece scraper for lamella separator 0,37 kW
| driving gear | : 1.500/3,8 rpm |
| electical connection | : 0,55 kW, 230/400 V, 50 Hz |
| insulation class | : IP 55 |
| shaft-Ø x l about | : 60 x 5.500 mm |
| material shaft | : stainless steel AISI 304 |
| scraper- Ø | : 500 mm, v-scraper 2-bl. |
| material scraper | : stainless steel AISI 304 |
| material of separator | : carbon steel |
| with 2 plastic-abrasion-blades |
price on application
1 piece lamella separator type 100 / 40 / 4,5 / K
technical specification:
| clarifying surface | : 100 m² |
| lamella distance | : 40 mm |
| declination angle | : 60° |
| content about | : 27 m³ |
| sludge content about | : 4,5 m³ |
| dimensions l x w x h about | : 4.780 x 3.050 x 6.000 mm (Höhe ohne Krählwerk) |
| length of lamellas | : 1.500 mm |
| material of separator | : carbon steel |
| material of lamellas | : PP |
| empty weight about | : 9 t |
design:
at a flow rate of e.g. 50 m³/h and a clarifying surface of 100 m² follows a clarifying surface of 0,5 m/h.
surface coating of the casing
| inside: | sandblasted (SA 2.5) |
| primary coating and 3 layers | |
| epoxide coating (about 400 µm) |
| outside: | sandblasted (SA 2.5), primary coating |
| coating and paint in RAL 5009 |
price on application
option:
1 piece scraper for lamella separator 0,55 kW
| driving gear | : 1.500/3,8 rpm |
| electical connection | : 0,55 kW, 230/400 V, 50 Hz |
| insulation class | : IP 55 |
| shaft-Ø x l about | : 60 x 5.500 mm |
| material shaft | : stainless steel AISI 304 |
| scraper- Ø | : 500 mm, v-scraper 3-bl. |
| material scraper | : stainless steel AISI 304 |
| material of separator | : carbon steel |
| with 3 plastic-abrasion-blades |
price on application
For more informations please contact us:
| Leiblein GmbH · Adolf-Seeber-Str. 2 · 74736 Hardheim · Germany · | Phone: | +49 (0) 6283 - 2220 0 |
| Fax: | +49 (0) 6283 - 2220 50 | |
| E-Mail: | leiblein@leiblein.com | |
| Homepage: | http://www.leiblein.com |
