waste water from PVC manufactoring
practical conditions:
The manufacturing of PVC raw materials causes different types of waste water (e.g. waste water from vacuum filtration). The water is precipitated and the particles are reduced by sedimentation. The dewatering of the sludge is made of a filter press.
Because of altered processes and increasing flow rates, the waste water plant has to be modified.
The very aggressive water and the retransitionaled space demanded a special design and construction of the lamella separator.
 |
Detail lamella separator |
technical data:
| flow rate | : 20 m³/h |
| clarifying surface | : 140 m² |
| purification capacity | : 0,15 m/h |
| kind of lamellas | : Leiblein-honeycomb-lamella-filter |
| material lamellas | : polypropylene |
| lamella distance | : 40 mm |
| declination angle | : 60 ° |
| material of casing | : stainless steel AISI 316 Ti |
Click here or the flow sheet for an enlarged view!
back to 'referenes process water'
All in all:
purification of effluents - an optimal solution!
For more informations please contact us:
| Leiblein GmbH · Adolf-Seeber-Str. 2 · 74736 Hardheim · Germany · | Phone: | +49 (0) 6283 - 2220 0 |
| Fax: | +49 (0) 6283 - 2220 50 | |
| E-Mail: | leiblein@leiblein.com | |
| Homepage: | http://www.leiblein.com |
