purification of brine
The manufacturing of a special product in a chemical works causes a big amount of dirty brine. If the waste particles are separated the brine can be sold as a valuable product.
The high chemical load of the media, high temperature and the very high amount of sludge causes high demands for the design and the manufacture of the lamella separator.
technical data:
| flow rate (inlet) | : 30 m³/h |
| flow rate (sludge) | : 15 m³/h |
| medium | : brine |
| ingredients | : chalk, gypsum, loam, coke |
| temperature | : 60 - 85 °C |
| clarifying surface | : 60 m² |
| purification capacity | : 0,5 m/h |
| kind of lamellas | : Leiblein-honeycomb-lamella-filter |
| material lamellas | : polypropylene |
| lamella distance | : 50 mm |
| declination angle | : 60 ° |
| material of casing | : steel |
picture: plant for purification of brine
back to 'referenes process water'
All in all:
purification of effluents - an optimal solution!
For more informations please contact us:
| Leiblein GmbH · Adolf-Seeber-Str. 2 · 74736 Hardheim · Germany · | Phone: | +49 (0) 6283 - 2220 0 |
| Fax: | +49 (0) 6283 - 2220 50 | |
| E-Mail: | leiblein@leiblein.com | |
| Homepage: | http://www.leiblein.com |
