inclined filter
'top'
-inclined filters are used for filtering of production liquids in the industry.
-inclined filters
- guarantee effective filtration with all liquids.
- avoid stopping of the production because they don't get blocked.
- are beneficial for filtering fluids with a high degree of dirt and particles.
- significantly increase the life of liquids.
- improve the operation safety.
- increase the economic results.
-inclined filters are exemplary used for:
- cooling lubricants and emulsion
- cleaning liquids/degreasing baths
- waste water treatment
- paint spraying cabins
- circuits of cooling water
- processing liquids
- filter regeneration water
technical details:
| material | : AISI 304 | available filter-fleeces in polyester, | |
main voltage |
: 400 V / 50 Hz / 3~ | viscose or polypropylene with grade of filtration from 5 - 70 µm |
| Type | flow rate* | L1 | L2 | LT | LS | B | BV | H1 | H2 | H3 | HT | inlet |
| l/min (m³/h) | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | Rp / DN | |
| SF 500 | 140 (8) | 1100 | 980 | 1000 / 1500 | 230 | 720 | 500 | 535 | 500 | 200-400 | 1 1/2" | |
| SF 1000 | 320 (19) | 1100 | 980 | 1000 / 1500 | 230 | 1220 | 1000 | 635 | 535 | 500 | 200-400 | 1 1/2" / DN 80 |
| SF 1000 L | 480 (28) | 2100 | 1980 | 2000 / 2750 | 230 | 1220 | 1000 | 635 | 535 | 500 | 200-400 | 1 1/2" / DN 80 |
'top'
flotate for free!
further advantages of the inclined filter
- filter fleece supply from down -> fleece is first loaded with the sediment.
- flotate is pulled off together with the sediment on the site of discharging -> optimal exploitation of the fleece
- filter cake is separated from the fleece -> requirements of the cycle economy-law are fulfilled by the separate disposal of fleece and mud.
- the filter fleece lies flat on the inclined filter -> exploitation of the total width of the fleece
- the inclined filter is stuffed up at its sides -> unfiltered medium doesn't get into the clean tank.
- multiple use of the filter fleece in grinding processes -> low running costs
- high-grade-steel-installation -> long life
- only gear-engine with drive shaft are parts subject to wear and tear -> low in maintenance
- components: German made -> spare parts easily available
- inclined plane -> well-drained filter cake
filtration technique - everything's clear !
'top'
For more informations please contact us:
| Leiblein GmbH · Adolf-Seeber-Str. 2 · 74736 Hardheim · Germany · | Phone: | +49 (0) 6283 - 2220 0 |
| Fax: | +49 (0) 6283 - 2220 50 | |
| E-Mail: | leiblein@leiblein.com | |
| Homepage: | http://www.leiblein.com |
